Theoretical Insights into the Photophysical Properties of 4CzIPN Doped in Different Hosts: A Multiscale Study.

As a typical thermally activated delayed fluorescence (TADF) emitter with green emission, 4CzIPN has attracted much attention recently. Most studies indicated that 4CzIPN doped in different hosts presented different performances; thus, the hosts should have an obvious influence on its photophysical properties. Herein, the influence of four kinds of hosts, including m-CzPym, m-CzTrz, p-CzPym, and p-CzTrz, on the photophysical properties of 4CzIPN is investigated. Molecular dynamics simulations were performed to simulate the host-guest conformations, and the photophysical properties were studied using the combined quantum mechanics/molecular mechanics method coupled with the thermal-vibration correlation function method. It is found that 4CzIPN in doped films has larger transition dipole moments and spin-orbital coupling constants compared to that in nondoped films. Faster radiative decay, intersystem crossing rates, and higher fluorescence efficiency could be obtained in doped films. Our work helps to better understand the photophysical properties of 4CzIPN in doped films and may favor the design of new hosts.

Role of Bridging Groups in Regulating the Luminescence and Charge Transfer Properties of Thermally Activated Delayed Fluorescence Molecules: A Theoretical Perspective.

Organic emitters with a simultaneous combination of aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) characteristics are in great demand due to their excellent comprehensive performances toward efficient organic light-emitting diodes (OLEDs), biomedical imaging, and the telecommunications field. However, the development of efficient AIE-TADF materials remains a substantial challenge. In this work, light-emitting properties of two AIE-TADF molecules with different bridging groups ICz-BP and ICz-DPS are theoretically investigated in the solid state with the combined quantum mechanics/molecular mechanics (QM/MM) method and the thermal vibration correlation function (TVCF) theory. The research indicates that the C═O bridging bond in ICz-BP is more favorable than the S═O bridging bond in ICz-DPS for enhancing the planarity of the acceptor, increasing conjugation, and thereby elevating the transition dipole moment density. Simultaneously, the stacking pattern of ICz-BP in the solid facilitates a reduction in energy gap between S1 and T1 (ΔEST), achieving rapid reverse intersystem crossing rate (kRISC). Furthermore, compared to toluene, the stacking patterns of ICz-BP and ICz-DPS in the solid effectively suppress the out-of-plane wagging vibration of the acceptor, thereby inhibiting the loss of nonradiative energy in the excited state and realizing aggregation-induced emission. Moreover, the charge transport properties of both electrons and holes in ICz-BP are found to be higher than the corresponding rates in ICz-DPS, attributed to the smaller internal reorganization energy of ICz-BP in the solid state. Additionally, the calculations reveal a more balanced charge transport characteristic in ICz-BP, contributing to efficient exciton recombination and emission and ultimately mitigating efficiency roll-off. Based on these computational results, we aim to unveil the relationship between molecular structure and light-emitting properties, aiding in the design and development of efficient AIE-TADF devices.

Modulation of luminescence properties of circularly polarized thermally activated delayed fluorescence molecules with axial chirality by donor engineering.

Multifunctional thermally activated delayed fluorescence (TADF) materials are currently a trending research subject for luminescence layer materials of organic light-emitting diodes (OLEDs). Among these, circularly polarized thermally activated delayed fluorescence (CP-TADF) materials have the advantage of being able to directly achieve highly efficient circularly polarized luminescence (CPL). The simultaneous integration of outstanding luminescence efficiency and excellent luminescence asymmetry factor (glum) is a major constraint for the development of CP-TADF materials. Therefore, on the basis of first-principles calculations in conjunction with the thermal vibration correlation function (TVCF) method, we study CP-TADF molecules with different donors to explore the feasibility of using the donor substitution strategy for optimizing the CPL and TADF properties. The results indicate that molecules with the phenothiazine (PTZ) unit as the donor possess small energy difference, a great spin-orbit coupling constant and a rapid reverse intersystem crossing rate, which endow them with remarkable TADF features. Meanwhile, compared with the reported molecules, the three designed molecules exhibit better CPL properties with higher glum values. Effective molecular design strategies by donor engineering to modulate the CPL and TADF properties are theoretically proposed. Our findings reveal the relationship between molecular structures and luminescence properties of CP-TADF molecules and further provide theoretical design strategies for optimizing the CPL and TADF properties.

Conformational Isomerization Effect on Singlet/Triplet Energy Consumption Process of Thermally Activated Delayed Fluorescence Molecules with Aggregation Induced Emission: A QM/MM Study.

Thermally activated delayed fluorescence (TADF) molecules with aggregation-induced emission (AIE) properties hold tremendous potential in biomedical sensing/imaging and telecommunications. In this study, a multiscale method combined with thermal vibration correlation function (TVCF) theory is used to investigate the photophysical properties of the novel TADF molecule CNPy-SPAC in toluene and crystal and amorphous states. In the crystal state, an increase in radiative rates and a decrease in nonradiative rates lead to AIE. Additionally, conformational isomerization effects result in significantly different luminescent efficiencies between the two crystal structures. Furthermore, the isomerization effect allows for the coexistence of three configurations in the amorphous state. Among them, the non-TADF quasi-axial (Qa) configuration may facilitate energy transfer to the TADF-characteristic quasi-equal/quasi-equal-H (Qe/Qe-H) configurations, enhancing AIE. Moreover, the Qa configuration enables rapid electron transport, offering the potential for self-doped devices. Our work elucidates a new mechanism for the isomerization effect in AIE-TADF molecules.

Theoretical design and performance prediction of deep red/near-infrared thermally activated delayed fluorescence molecules with through space charge transfer.

Thermally activated delayed fluorescence (TADF) molecules with through-space charge transfer (TSCT) have attracted much attention in recent years because of their ability to simultaneously reduce the energy difference (ΔEST) and enlarge the spin-orbit coupling (SOC). In this paper, 40 molecules are theoretically designed by changing the different substitution positions of the donors and acceptors, and systematically investigated based on the first-principles calculations and excited-state dynamics study. It is found that the emission wavelengths of v-shaped molecules with intramolecular TSCT are larger than those of the molecules without TSCT. Therefore, the intramolecular TSCT can induce the red-shift of the emission and realize the deep-red/near-infrared emission. Besides intramolecular TSCT can simultaneously increase the SOC as well as the oscillator strength and reduce the ΔEST. In addition, PXZ or PTZ can also favor the realization of smaller ΔEST and red-shift emission. Our calculations suggest that intramolecular TSCT and suitable donors (-PXZ or -PTZ) are an effective strategy for the design of efficient deep red/near-infrared TADF emitters.

Theoretical study on the influence of substitution position on the luminescence properties and charge transfer characteristics of thermally activated delayed fluorescent molecules.

Thermally active delayed fluorescence (TADF) molecules have potentially applications in organic light-emitting diodes (OLEDs) and biomedical sensing. Although TADF emitters have witnessed a rapid development, it remains challenging to study the relationship between molecular structures and luminescence properties as well as carrier mobility transfer properties in theory. In this work, the photophysical properties and luminescence mechanisms of isomers TPA-APQDCN-C (donors at para-position) and TPA-APQDCN-Y (donors at ortho-position) were studied based on density functional theory (DFT) and thermal vibration correlation function (TVCF) method. The results showed that both TPA-APQDCN-C with para-substituted donor and TPA-APQDCN-Y with ortho-substituted donors exhibit red emission in toluene and crystal state. Furthermore, compared to ortho-substituted donors, para-substituted donors promote a redshift in emission wavelength. In addition, the fluorescence efficiencies of TPA-APQDCN-C is obviously higher than that of TPA-APQDCN-Y due to its larger radiative rate and less non-radiative decay rate. Besides, para-substitution (TPA-APQDCN-C) leads to the smaller energy gap between S1 and T1 and the larger spin-orbit coupling (SOC) constant, which is beneficial for increasing the reverse crossing intersystem (RISC) rates. In addition, the carrier mobilities are studied based on the kinetic Monte Carlo simulations. The calculations show that TPA-APQDCN-C are more beneficial for the transfer of holes compared to TPA-APQDCN-Y. This study reveals TPA-APQDCN-C with donors at para-position has a better TADF properties and hole transfer ability, which holds guiding significance for the design of TADF devices with high luminescence efficiency and rapid hole transfer.

First-principles studies on the electronic and photocatalytic water splitting properties of surface functionalized Y2C-based MXenes.

Recently, MXenes, an emerging family of two-dimensional (2D) materials, have attracted increasing interest for photocatalytic water splitting due to their various excellent physical and chemical properties, such as large specific surface area, good hydrophilicity, and remarkable light absorption ability. However, the photocatalysts of MXenes with symmetric structures are limited by rapid recombination of photo-generated carriers and the prerequisite of a large band gap no less than 1.23 eV. Differently, Janus MXenes with different surface functional groups facilitate the separation of photo-generated electrons and holes with the help of the intrinsic electric field. And, at the same time, there is no prerequisite for the band gap of Janus MXene photocatalysts as long as they possess appropriate band edge positions. Here, we explored the structural, electronic and photocatalytic water splitting properties of symmetric Y2CT2 and Janus Y2CTT' MXenes (T, T' = H, F, Cl, OH) using the density functional theory (DFT) method. Our calculations show that all the investigated Y2CT2 are not suitable photocatalysts for photocatalytic water splitting at all pH values (pH = 0, 7, and 14). In contrast, all the investigated Janus Y2CTT' MXenes are good water splitting photocatalysts with high optical absorption coefficients and remarkable solar-to-hydrogen (STH) efficiencies larger than 18% at pH = 14. Moreover, the STH efficiencies are larger than 18% even at all investigated pH values for Y2CHCl (18.5-22.6%), Y2 CFCl (∼18.7%), and Y2 C(OH)Cl (∼19.4%). Based on the first-principles calculations, we here for the first time propose an easy strategy to design Janus MXene photocatalyst candidates with possible high STH efficiency according to the electronic properties of their symmetric counterparts. Our study is helpful for the future design of Janus MXenes and more generally Janus 2D photocatalysts for water splitting with high STH efficiency.

Regulating the electronic properties of the WGe2N4 monolayer by adsorption of 4d transition metal atoms towards spintronic devices.

We study the regulation of the electronic and spin transport properties of the WGe2N4 monolayer by adsorbing 4d transition metal atoms (Y-Cd) using density functional theory combined with non-equilibrium Green's function. It is found that the adsorption of transition metal atoms (except Pd, Ag and Cd atoms) can introduce a magnetic moment into the WGe2N4 monolayer. Among the transition metal atoms, the adsorption of Nb and Rh atoms transforms WGe2N4 from a semiconductor to a half-metal and a highly spin-polarized semiconductor, respectively. The half-metallic Nb-adsorbed WGe2N4 system is selected to investigate the spin transport properties, and a high magnetoresistance ratio of 107% is achieved. In both parallel and antiparallel magnetization configurations, the spin filtering efficiency reaches close to 100% in the whole bias range, and the antiparallel magnetization configuration exhibits a dual spin filtering effect with a rectification ratio of up to 104. Our study predicts that the adsorption of 4d transition metal heteroatoms is an effective method to regulate the electronic and magnetic properties of WGe2N4 towards high-performance spintronic devices.

Multi-resonance thermally activated delayed fluorescence molecules with intramolecular-lock: theoretical design and performance prediction.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) molecules with narrow full width at half maximum (FWHM) have attracted much attention recently. In this work, 36 borane/amine (B/N) type MR-TADF molecules were theoretically designed by using an intramolecular-lock strategy and systematically studied based on first-principles calculations. It was found that intramolecular-lock at different positions and in different manners could induce different luminescent properties. The calculated oscillator strengths for PXZ-L2 and PTZ-L2 locking systems are weaker than that for 2DPABN (without intramolecular-lock), while the Cz-L1 and TMCZ-L1 locking could result in stronger oscillator strength. Though the calculated FWHM of all the systems with intramolecular-lock is higher than that of 2DPABN, the Cz, TMCz and DMAC locking at L1 or L2 would induce relatively small FWHM which is comparable to that of 2DPABN. Our calculation results indicate that intramolecular-lock could enhance the SOC values and decrease the energy gap between the first singlet excited state and the first triplet excited state, which is quite favorable to reverse intersystem crossing. The Cz, TMCz and DMAC locking systems could realize comparable and higher efficiency than 2DPABN, thus higher quantum efficiency could be obtained. Our calculation results indicate that the intramolecular-lock strategy is an effective method to realize the design of highly efficient MR-TADF emitters.

Theoretical exploration of the bromine substitution effect and hydrostatic pressure responsive mechanism for room temperature phosphorescence.

Stimulus-responsive organic room temperature phosphorescence (RTP) materials with long lifetimes, high efficiencies and tunable emission properties have broad applications. However, the amounts and species of efficient RTP materials are far from meeting the requirements and the inner stimulus-responsive mechanisms are unclear. Therefore, developing efficient stimulus-responsive RTP materials is highly desired and the relationship between the molecular structures and luminescent properties of RTP materials needs to be clarified. Based on this point, the influences of different substitution sites of Br on the luminescent properties of RTP molecules are studied by the combined quantum mechanics and molecular mechanics (QM/MM) coupled with thermal vibration correlation function (TVCF) theory. Moreover, the hydrostatic pressure effect on the efficiencies and lifetimes is explored and the inner mechanism is illustrated. The results show that, for the exciton conversion process, the o-substitution molecule possesses the largest spin-orbit coupling (SOC) value (〈S1|Hso|T1〉) in the intersystem crossing (ISC) process and this is conducive to the accumulation of triplet excitons. However, for the energy consumption process, the large SOC value (〈S0|Hso|T1〉) for the p-substitution molecule brings a fast non-radiative decay rate, and the small SOC value for the m-substitution molecule generates a decreased non-radiative decay rate which is helpful for realizing long lifetime emission. Keeping with this perspective, the conflict between high exciton utilization and long RTP emission needs to be balanced rather than enhancing the SOC effect by simply adding heavy atoms in RTP systems. Through regulating the molecular stacking modes by the hydrostatic pressure effect, the inner stimulus-responsive mechanism is revealed. The data of 〈S1|Hso|T1〉 in the ISC process remain almost unchanged, while 〈S0|Hso|T1〉 values and transition dipole moments are sensitive to the hydrostatic pressure. Under 1 GPa, the RTP molecule achieves a maximum efficiency (81.17%) and long lifetime (2.72 ms) with the smallest SOC and decreased non-radiative decay rate. To our knowledge, this is the first time that the hydrostatic pressure responsive mechanism for RTP molecules is revealed from a theoretical perspective, and the relationships between molecular structures and luminescent properties are detected. Our work could facilitate the development of high performance RTP molecules and expand their applications in multilevel information encryption.

Decoding the mechanical conductance switching behaviors of dipyridyl molecular junctions.

Dipyridyl molecular junctions often show intriguing conductance switching behaviors with mechanical modulations, but the mechanisms are still not completely revealed. By applying the ab initio-based adiabatic simulation method, the configuration evolution and electron transport properties of dipyridyl molecular junctions in stretching and compressing processes are systematically investigated. The numerical results reveal that the dipyridyl molecular junctions tend to form specific contact configurations during formation processes. In small electrode gaps, the pyridyls almost vertically adsorb on the second Au layers of the tip electrodes by pushing the top Au atoms aside. These specific contact configurations result in stronger molecule-electrode couplings and larger electronic incident cross-sectional areas, which consequently lead to large breaking forces and high conductance. On further elongating the molecular junctions, the pyridyls shift to the top Au atoms of the tip electrodes. The additional scattering of the top Au atoms dramatically decreases the conductance and switches the molecular junctions to the lower conductive states. Perfect cyclical conductance switches are obtained as observed in the experiments by repeatedly stretching and compressing the molecular junctions. The O atom in the side-group tends to hinder the pyridyl from adsorbing on the second Au layer and further inhibits the conductance switch of the dipyridyl molecular junction.

Highly Efficient Luminescence from a Red Thermally Activated Delayed Fluorescence Emitter with Flexible Conformation of Ancillary Groups.

Robust scaffolds were typically applied in thermally activated delayed fluorescence (TADF) molecules to suppress the non-radiative decay, trigger the fast spin-flipping, and enhance the light out-coupling efficiency. Herein, we disclosed for the first time the positive effect of flexible conformation of ancillary groups on the photophysical properties of TADF emitter. The red TADF emitter Ph-TPA with flexible conformation demonstrated small excited-state structural distortion and low reorganization energy compared to the counterpart Mc-TPA with a rigid macrocycle. Consequently, Ph-TPA showed an excellent photoluminescent quantum yield (PLQY) of 92 % and a state-of-the-art external quantum efficiency (EQE) of 30.6 % at 630 nm. This work could deepen our understanding of structure-property relationships of organic luminophores and help us to rationalize the design of efficient TADF materials.

Exploring the luminescence properties and sensing mechanism of a turn-on TADF probe for sulfite.

Fluorescent probes with a microsecond lifetime have attracted much attention in biological detection. The luminescence properties and responsive mechanisms of a probe [DCF-MPYM-lev-H]- for detecting sulfite and its corresponding product [DCF-MPYM-2H]2- are studied based on density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations as well as the thermal vibration correlation function method. It is found that the luminescence efficiency of the probe increases obviously after reacting with sulfite, which is induced by increased radiative decay rates and decreased nonradiative rates. In addition, the thermally activated delayed fluorescence (TADF) properties of products are confirmed by analyzing the spin-orbital constants and energy gaps between the singlet excited states and the triplet excited states. The calculation results favor the understanding of the luminescence properties and responsive mechanism of a turn-on TADF probe for sulfite, which may provide a theoretical reference for the development of new TADF probes.

Two-dimensional MoSi2As4-based field-effect transistors integrating switching and gas-sensing functions.

Multifunctional nanoscale devices integrating multiple functions are of great importance for meeting the requirements of next-generation electronics. Herein, using first-principles calculations, we propose multifunctional devices based on the two-dimensional monolayer MoSi2As4, where a single-gate field-effect transistor (FET) and FET-type gas sensor are integrated. After introducing the optimizing strategies, such as underlap structures and dielectrics with a high dielectric constant (κ), we designed a 5 nm gate-length MoSi2As4 FET, whose performance fulfilled the key criteria of the International Technology Roadmap for Semiconductors (ITRS) for high-performance semiconductors. Under the joint adjustment of the underlap structure and high-κ dielectric material, the on/off ratio of the 5 nm gate-length FET reached up to 1.38 × 104. In addition, driven by the high-performance FET, the MoSi2As4-based FET-type gas sensor showed a sensitivity of 38% for NH3 and 46% for NO2. Moreover, the weak interaction between NH3 (NO2) and MoSi2As4 favored the recycling of the sensor. Furthermore, the sensitivity of the sensor could be effectively improved by the gate voltage, and was increased up to 67% (74%) for NH3 (NO2). Our work provides theoretical guidance for the fabrication of multifunctional devices combining a high-performance FET and sensitive gas sensor.

Interfacial electronic properties between PtSe2 and 2D metal electrodes: a first-principles simulation.

Monolayer (ML) PtSe2 is a two-dimensional (2D) semiconductor with a modest band gap and high carrier mobility, and it is a promising 2D material for electronic devices. Finding suitable metal electrodes is a key factor in fabricating high-performance PtSe2 field effect transistors (FETs). In this study, a series of 2D metals, transition metal dichalcogenides (NbSe2, TaS2), borophene, and MXenes (V2C(OH)2, V2CF2, Nb2C(OH)2, Nb2CF2, Nb2CO2, Hf2C(OH)2, Hf2CF2) were used as electrodes for FET fabrication. The interfacial electronic properties of electrodes and PtSe2 were studied in both the vertical and lateral directions using the ab initio method. In the vertical direction, PtSe2 formed ohmic contacts with most of the 2D metals except for Nb2CF2 and Hf2CF2. Specifically, in the cases of Nb2CF2 and Hf2CF2, p- and n-type Schottky contacts were formed with Schottky barrier heights (SBHs) of 0.48 eV and 0.02 eV, respectively. In the lateral direction, PtSe2 with contacting Hf2CF2 and V2C(OH)2 electrodes formed n-type Schottky contacts with SBHs of 0.14 eV and 0.09 eV, respectively. In the cases of TaS2 and Nb2CF2 electrodes, p-type Schottky contacts with SBHs of 0.35 eV and 0.29 eV, respectively, were formed. Moreover, n-type ohmic contacts were observed when Hf2C(OH)2 and Nb2C(OH)2 electrodes were applied, and p-type ohmic contacts were formed when borophene, NbSe2, Nb2CO2, and V2CF2 electrodes were used. This work reports a systematic investigation of ML PtSe2-2D metal interfaces and serves as a practical guide for selecting electrode materials for PtSe2 FETs.

Role of halogen effects and cyclic imide groups in constructing red and near-infrared room temperature phosphorescence molecules: theoretical perspective and molecular design.

Organic room temperature phosphorescence (RTP) has been widely investigated to realize long-lifetime luminescent materials and improvement in their efficiency is a key focus of research, especially for red and near-infrared (NIR) RTP molecules. However, due to the lack of systematic studies on the relationship between basic molecular structures and luminescence properties, both the species and amounts of red and NIR RTP molecules remain far from meeting the requirements of practical applications. Herein, based on density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations, the photophysical properties of seven red and NIR RTP molecules in tetrahydrofuran (THF) and in the solid phase were theoretically studied. The excited state dynamic processes were investigated by calculating the intersystem crossing and reverse intersystem crossing rates considering the surrounding environmental effects in THF and in the solid phase using a polarizable continuum model (PCM) and quantum mechanics and molecular mechanics (QM/MM) method, respectively. The basic geometric and electronic data were obtained, Huang-Rhys factors and reorganization energies were analyzed, and natural atomic orbital was used to calculate the orbital information of the excited states. Simultaneously, the electrostatic potential distribution on molecular surfaces was analyzed. Further, intermolecular interactions were visualized using the molecular planarity binding independent gradient model based on Hirshfeld partition (IGMH). The results showed that the unique molecular configuration has the potential to achieve red and NIR RTP emission. Not only did the substitutions of halogen and sulfur make the emission wavelength red-shifted, but also linking the two cyclic imide groups could further make the emission wavelength longer. Moreover, we found that the emission characteristics of molecules in THF had a similar trend as in the solid phase. Based on this point, two new RTP molecules with long emission wavelengths (645 nm and 816 nm) are theoretically proposed and their photophysical properties are fully analyzed. Our investigation provides a wise strategy to design efficient and long-emission RTP molecules with an unconventional luminescence group.

Mechanically controllable conductance in carbon nanotube based nanowires.

Carbon nanotubes (CNTs) are considered to be promising candidates for fabricating nanowires, due to their stable quasi-one-dimensional structure. Controlling the electronic transport properties is one of the most vital issues for molecular nanowires. Herein, using density functional theory combined with nonequilibrium Green's function method, we systematically investigate the current evolution of (4, 4) single-walled CNT based nanowires in squashing processes. When the CNTs are squashed by applying different pressure along the radial direction, a negative correlation can be found between the electrical conductance of the nanowire and the pressure. Besides, the response of the nano junction current to pressure is influenced by the squashing direction. Not only does the geometric structure show symmetry breaking in the specific squashing direction, which causes the CNT electrodes to change from conductors to semiconductors, but also obvious π stacking behavior can be witnessed in this squashing direction. More intriguingly, because the current of the nano junction can be completely cut off by squashing the CNTs, a significant switching behavior with the on/off ratio of up to 103 is obtained at low bias voltages. The underlying mechanisms for these phenomena are revealed by the analysis of the band structures, transmission spectra, frontier molecular orbitals and transmission pathways. These electronic transport properties make CNT a promising candidate for realizing conductance controllable nano devices.

Exploiting the Momentum Distribution in Atomically Confined Plasmonic Fields by Inelastic Scatterings.

The utilization of atomically confined plasmonic fields has revolutionized the imaging technique. According to the fundamental position-momentum uncertainty principle, such a narrow spatial distribution certainly leads to a broad momentum distribution in the fields, which has however been overlooked. Here we propose a novel exploitation for the momentum distribution by adaptively satisfying the conservation law of momentum in inelastic Raman scatterings in periodic systems, providing a unique optical means of directly measuring the whole phonon dispersions. The proposed technique is particularly useful for measuring phonon dispersions of low-dimensional hydrogen-rich materials, which are completely inaccessible via other techniques. The numerical results for a single all-trans polyacetylene chain demonstrate that all phonon dispersion branches can be conclusively measured from their Raman images for the first time. Our findings highlight a unique advantage of the emerging momentum-based nanophotonics and open the door for exploiting highly confined plasmonic fields in another dimension.

Using azaacene as an acceptor unit to construct an ultraefficient red fluorophore with an EQE over 40.

Azaacenes, which have been known for a long time, are of scientific and practical importance in organic electronics. Azaacenes once shone as the luminophore in organic light-emitting diodes (OLEDs). However, due to the low exciton utilization efficiency and/or the aggregation induced quenching (ACQ) effect, N-heteroacene based OLEDs generally showed inferior device performance. In this work, azaacene has been revisited and applied as an acceptor for a red fluorophore (AZA-TPA), where the judicious connection pattern between donor and acceptor maximized the harvest of singlet and triplet excitons, resulting in a high photoluminescence efficiency of 94.6% in doped films (3 wt%). In addition, the linearly-fused polycyclic structure contributed to a high horizontal emitting dipole ratio (Θ‖ = 90%). As a result, an AZA-TPA-based OLED achieved an unprecedented external quantum efficiency of 41.30% at 610 nm. This work will pave a new path for the development of efficient N-heteroacene-based fluorophores.

Intramolecular charge transfer effect for highly efficient deep red and near infrared thermally activated delayed fluorescence.

Thermally activated delayed fluorescence (TADF) materials with emission in the deep red and near infrared (DR/NIR) region are underresearched due to the limited choice of strong donor/acceptor units. The current mainstream strategy for the design of DR/NIR TADFs is to increase the acceptor strength via the introduction of multiple sub-acceptor units, thereby narrowing the bandgap. In this work, the intramolecular charge transfer (ICT) effect was applied for the development of acceptor units to achieve efficient DR/NIR TADFs. The ICT effect within the acceptor unit enhanced the π-electron delocalization, lowered the LUMO and redshifted the emission wavelength. In addition, the fusion of the donor unit into the planar acceptor skeleton rigidified the molecular structure and reduced the non-radiative decay. This proof-of-concept study demonstrated that ICT is an undoubtedly effective strategy for the rational design of efficient DR/NIR TADFs.